If you need help migrating Joomla please see our contact details for I-Tech Web Design North Wales

I followed the below information and it worked pefectly…first time!

How to set up port forwarding to an internal web server

There have been many users stating incorrectly that port forwarding doesn’t work on the Sky router, so I decided to write a click-by-click guide on how to set up port forwarding to allow a web server that is running on the internal network to be accessible from the Internet. This guide does not explain how to set up the web server – it assumes that you already know how to do this. The whole lot takes about 30 seconds (well, testing adds a few minutes more). I’d like to thank isu for trying out these instructions to prove that, yes, it really does work after all.

Beware: when publishing an internal web server to the Internet, the bandwidth that users will experience will be limited to the upload, not download, speed. Also, you might want to ensure that you don’t fall foul of the fair usage policy by running a high-usage web site!

A few assumptions to start with:

1. The only Internet connection you have is via the Sky router. If you have, for example, multiple Internet connections, or some clever internal routing between routers, then your port forwarding may not (probably won’t) work.
2. The router is fresh out of the box or has been reset back to factory defaults. In addition, it is running the Sky firmware.
3. The internal IP address of the web server is 192.168.0.2 and your router is 192.168.0.1.
The web server is not using host headers (that is, it can be accessed via its IP address). If this assumption is meaningless to you, worry not: we’ll test this in the first stage anyway!
4. The web server is using the default HTTP port: TCP port 80.
5. There are no local firewalls (including Windows firewall) running on the web server. If there is: stop it! It can be switched back on later, but for now, let’s just get it working without the server’s firewall.

Note: The instructions work with or without uPNP. Also, it is for web servers only. (OK, it can be adapted for any TCP or UDP port, but I’m strictly sticking to a web server in this guide lest it becomes over-complicated.)

Here goes…

1 Check that the web server is accessible internally by pointing a browser at it’s internal (NOT external) address: http://192.168.0.2. If that doesn’t work, fix the web server before continuing.
2. Log into the web interface of the firewall (the “admin”, “sky” one).
3. On the main page, under the “ADSL Port” section, make a note of the “IP Address”. You’ll need this later for testing.
4. Click “Firewall Rules” on the left.
5. Under “Inbound Services” click the “Add” button.
6. Change the Service to “HTTP(TCP:80)”.
7. Leave the action as “ALLOW always”.
8. In “Send to LAN Server” enter the IP address of the web server: 192.168.0.2, using the tab key (not the full stop) to move between each part of the IP address.
9. Leave all the other fields as they are.
10. Click the “Apply” button.
11. On the next screen, click the “Apply” button (the one next to the “Cancel” button).

Testing that it works…

On a PC that is on the Internet (i.e. NOT one on the same network as the web server) such as at an Internet cafe, fire up a web browser and point it to the public IP address of your Internet connection. This is the IP address that you made a note of in stage 3 above. For example, if the address you made a note of is 199.1.2.3, from the Internet cafe, you’d enter http://199.1.2.3 into the web browser.

If you’ve followed the instruction to the letter, the web page should appear and you have port forwarding working.

All that remains is:

Switch the firewall on the server back on (assuming there was one in the first place and you still want to run it). Test again. If it breaks, fix the web server’s firewall.

Get the router’s WAN IP address into a dynamic DNS service such as Dynamic Network Services, Inc. — DynDNS — Welcome. The “how to” do this is outside the scope of this guide.

Link to the original post is:

http://www.skyuser.co.uk/forum/sky-broadband-tutorial-section/10975-how-set-up-port-forwarding-internal-web-server.html#post63601

These instructions assume a moderate degree of experience working with your PC and are provided “as-is” for developers comfortable performing its steps.

Installing Windows XP Mode

1. Configure your PC’s BIOS for Hardware-Assisted Virtualization (HAV) by following the instructions here. HAV is not required but XP Mode will run much better if hardware-assisted virtualization can be enabled.
2. Navigate to the Download Windows XP Mode page. Choose your Windows 7 edition and language and then download, save, and run Windows XP Mode setup. Depending on the speed of your Internet connection, this can take up to an hour.
3. Return to the Download Windows XP Mode page, if needed choose your Windows 7 edition and language again, then download, save, and run Windows Virtual PC setup. You will need to restart your PC after this installation.
4. After restart, click the Windows 7 Start button, select All Programs > Windows Virtual PC > Windows XP Mode to begin first-time setup of the Windows XP Mode virtual machine. When first-time setup completes, you’ll find yourself in an XP Mode window with IE6 pre-installed.
5. Install an anti-virus program in the XP Mode virtual machine. Microsoft Security Essentials is free and works well with Windows XP Mode.
6. Install all the important and high priority updates except IE7 or IE8 using the Custom option of Window Update (this assumes you want this first virtual machine to stay with IE6). Since Windows Update will keep pushing either IE7 or IE8 on you, you should open each of these and choose “Don’t show this update again.”
7. Install any other software or utilities that you want available in the XP Mode virtual machine.

Once you’ve configured this first virtual machine, you can move onto copying it to create two more: one for IE7 and one for IE8. To do that, close all open applications then close your Windows XP Mode virtual machine. By default, the virtual machine will hibernate but that seems to be okay for the following steps.

Create a Second XP Mode Virtual Machine for IE7

Creating a second XP Mode virtual machine for IE7 is easier than setting up the first though the steps below are longer because they’re more complete. Briefly, all you need to do is copy the virtual hard disk file, create a new virtual machine using that hard disk file, rename the virtual computer, and use Windows Update to install IE7. Here are the steps in more detail:

1. Go to the folder where the virtual hard disk files are stored. These will be in the \AppData\Local\Microsoft\Windows Virtual PC\Virtual Machines folder under your user account. To find this folder:
   • Use Windows 7 Start menu to open your root user folder (the user name link at the top of the right column of the Start menu)
   • If you don’t see AppData in the list of folders, you need to turn on viewing hidden files and folders:
     • Press the Alt key to display Windows Explorer’s menu
     • Choose Folder options… from the Tools menu
     • Select the View tab
     • Click the radio button for “Show hidden files, folders, and drives”
     • Click OK
   • Double-click the AppData folder, the Local folder, the Microsoft folder, the Windows Virtual PC folder, and, finally, the Virtual Machines folder. Here you should see three files all with the root name “Windows XP Mode”.
2. Select Windows XP Mode file with the type Virtual Machine Hard Drive Image (.vhd extension if you’re showing extensions). Press Ctrl-C to copy the file and then Ctrl-V to paste a copy of it. Copying the file may take a few minutes.
3. Select the file named “Windows XP Mode – Copy”, press F2 to rename the file, and change the word “Copy” to “IE7”. The resulting name should be “Windows XP Mode – IE7” (the actual name is not important; this is just the convention I’ve used).
4. Now navigate back to your top-level user folder and open the Virtual Machines folder.
5. Click “Create virtual machine” on the command bar. This starts a multi-step wizard to create a new virtual machine.
6. Name the machine “Windows XP Mode – IE7” and click Next and then Next again on the second screen.
7. On the third screen, choose “Use an existing virtual hard disk”, then browse down to the \AppData\Local\Microsoft\Windows Virtual PC\Virtual Machines folder under your user account and select the “Windows XP Mode – IE7” virtual machine hard drive image file you created in step 3 above. Click Create.
8. Double-click your newly-created “Windows XP Mode – IE7” virtual machine. Log on using the password you used when you created the original Windows XP Mode machine.
9. Rename this “computer” so that it won’t conflict on the network if you run two virtual machines at the same time. In the running XP Mode virtual machine:
   • Click Start > My Computer
   • In the System Tasks panel, click View system information
   • Click the Computer Name tab
   • Click Change… to rename the computer
   • Change the computer name as you wish; I just change the last digit of the generated name
   • When prompted, restart the virtual machine to make this change
10. Start Windows Update and choose Custom. You should see something like this:
11. It’s somewhat tricky to get Windows Update to offer you IE7 because IE8 supersedes it. This sequence worked for me:
    • In the message box above, click “Restore them now”
    • Check Internet Explorer 8 for Windows XP and click “Restore and Check Again”
    • You’ll again see the “You’ve hidden important updates” message box. Click “Restore them now”
    • Check Internet Explorer 7 for Windows XP and click “Restore and Check Again”
    • You’ll now see only Internet Explorer 8 for Windows XP because IE8 supersedes IE7 but there’ll be no message about hidden updates. Uncheck “Internet Explorer 8 for Windows XP” and click “Don’t show this update again”
    • Close Windows Update, restart it from the Start menu, and choose Custom
    • You’ll once again see the hidden update message but you should also have one High Priority update: Internet Explorer 7 for Windows XP
    • Ensure IE7 is checked, click “Review and install updates,” and then “Install Updates”. This will take a while and restart your XP Mode virtual machine
12. After installing IE7, run Windows Update from the Start menu, choose Custom, and install the IE7 security updates. Windows Update will still tell you “You’ve hidden important updates.” That’s IE8, which we’ll install in a moment in a third XP Mode virtual machine
13. Shut down this virtual machine by selecting Close… from the Action menu and choosing Shut down in the drop down list

Create a Third XP Mode Virtual Machine for IE8

Creating a third XP Mode virtual machine for IE8 is even easier as we’ll start with the IE7 virtual machine hard disk image. The steps below assume you just completed the previous sequence and don’t repeat all the specific details.

1. Go to the folder where the virtual hard disk files are stored (the \AppData\Local\Microsoft\Windows Virtual PC\Virtual Machines folder under your user account), make a copy of the “Windows XP Mode – IE7” virtual hard disk image, and rename it “Windows XP Mode – IE8”
2. Go to the Virtual Machines folder directly under your root user folder
3. Click “Create virtual machine” on the command bar
4. Name the new virtual machine “Windows XP Mode – IE8”, click Next, and Next again
5. On the third panel of the wizard, select “Use an existing virtual hard disk”, browse to the folder containing the IE8 virtual hard disk file from step 1, choose the file “Windows XP Mode – IE8”, and click Create
6. Double-click the newly created “Windows XP Mode – IE8” virtual machine
7. Sign on to the machine as “xpmuser” with the password you provided when you created the first XP Mode virtual machine
8. Follow the steps in item 9, above, to rename this new virtual computer
9. Run Windows Update from the Start menu and choose Custom
10. Click “Restore them now” in the “You’ve hidden important updates” message box, check Internet Explorer 8, and click “Restore and Check Again”
11. Under High-priority Updates, ensure that Internet Explorer 8 is checked, click “Review and install updates”, click “Install Updates”, and then reply to the various prompts as IE8 installs
12. Run Windows Update / Custom and install the offered security updates

Success

The process outlined above took me about 2-3 hours to complete with interruptions. When finished, I could run the three Windows XP Mode virtual machines simultaneously and access the Internet from each.

One thing I’ve noticed is that the two copies of the original XP Mode virtual machine do not auto-logon like the first. There also appear to be other domain security-related issues but nothing that stopped me from using these additional XP Mode virtual machines to test old versions of IE against Internet content. If the host PC is part of a corporate domain, you may want to join your XP Mode virtual machine to that domain and add your domain account as a local user on the XP Mode virtual machine.

If you care mostly about just one previous version of IE, updating the base Windows XP Mode virtual machine to that version may be a bit smoother than the procedure I’ve outlined here.

—Ted Johnson, Microsoft Internet Explorer Team

We need to see what mini-components apply to which pages. We also need to confirm to which databse table these pages are written to.

Question 1: What page (. php) is the first”submit”page?: j02300regprop1.class.php,

1.1 Second Page: j02310regprop2.class.php

1.3 Third Page (Room/property type): j02320regprop3.class.php. And j04900saveproperty.class.php when the property is actually saved.

1.4 After you save (1.3) you should go to property details j04200editproperty.class.php. Here you add the geo lat and long + upload the main image for the property. (DB: jos_jomres_propertys)

We need to confirm the above and do some testing.

Thanks to the guys at webforless for their contribution so far.

www.smallbusinesscomputing.com
(Researched by: www.itechwebdesign.co.uk)

www.smallbusinesscomputing.com
(Researched by: www.itechwebdesign.co.uk)

And the last thing you want to do is create a Facebook Page that’s rarely refreshed with new content.

Marketers at business-to-business (B2B) companies might also wonder if Facebook — aimed at consumers — is a good fit in the first place. While plenty of B2B companies are experimenting with Facebook, some are finding it difficult to get fans. B2B “isn’t sexy,” Michael Greene, a Forrester Research analyst, told The Wall Street Journal.

Still, B2B customers are people. People are what Facebook is all about. And people spend money on products and services. It’s been estimated that Facebook users spend an additional $71.84 they wouldn’t otherwise spend on products they are fans of, according to social media metrics firm Syncapse.

A Facebook Page is probably worth your while — if you have the time, knowhow and resources to do it right. Some use a Facebook Page in lieu of setting up a small business website. At a minimum, some B2B companies find that posting regular updates on Facebook (as well as on Twitter and LinkedIn) help them stay “top of mind” with customers.

www.smallbusinesscomputing.com
(Researched by: www.itechwebdesign.co.uk)

For many of us, the internet can be complex and difficult to understand but a new guide put together by illustrator Christoph Niemann and internet giant Google helps to demystify the internet and explain commonly used terms in an easy-to-understand way.

The guide is called “20 Things I Learned about Browsers and the Web” and takes users on a journey of how the web works, from its very beginning to new web technologies expected to arrive in the near future.

“’20 Things’ is written by the Chrome team, and continues our tradition of finding new ways to help explain complex but fascinating ideas about technology,” explains Google’s Product Marketing Manager, Min Li Chan, in a November 19 blog post.

“This handy guide is for those of us who’d like to better understand the technologies we use every day.”

The short guide explains the meaning of terms such as HTML5, JavaScript, TCP/IP, Cloud Computing, Web Apps, CSS, AJAX Plug-ins, malware and phishing.

You can read “20 Things I Learned about Browsers and the Web” here:
http://www.20thingsilearned.com/

For more informative “internet explained in plain English” resources visit the following pages:

Web 3.0 and the semantic web explained in a 15 minute video
http://www.wirefresh.com/web-3-0-and-the-semantic-web-explained-in-a-15-minute-video-sort-of/

Web 3.0 Concepts Explained in Plain English
http://www.labnol.org/internet/web-3-concepts-explained/8908/

World Wide Web – What happens behind the scenes and The Complete History of Internet explained in 8 minutes
http://www.labnol.org/internet/how-internet-works-video/8156/

The Internet Explained
http://www.searchandgo.com/articles/internet/net-explained-1.php

Simple Internet Glossary (slightly outdated but still useful)
http://www.2graphic.co.uk/web-help/internet-glossary.htm

Relaxnews
http://www.independent.co.uk/life-style/gadgets-and-tech/the-complexities-of-the-web-and-internet-browsers-explained-in-simple-english-2140829.html